How to Change the Gas on a Rider


Instructions


Step 1

Place your mower on a flat, level surface. Turn the mower off. Make sure the engine is cool. Remove the ignition key and disconnect the spark plug ignition wire.


Step 2

Unscrew the gas cap.


Step 3

Using the Arnold Siphon Pump, place the top port into the gas tank on the engine, and the bottom port into a proper container.


Step 4

Prime the pump by pumping the handle three to four times. Once the liquid begins to flow, it will flow without further pumping.


Step 5

Remove the Arnold Siphon Pump and add new gas.


Step 6

Replace the gas cap.


Step 7

Reconnect the spark plug ignition wire.


Step 8

Dispose of the gas properly.